Band Pusher Clamp Adhesive Remover – Dual-Function Orthodontic Instrument

The Band Pusher Clamp Adhesive Remover  is a dual-function reusable orthodontic instrument manufactured from medical-grade stainless steel, available in four working end sizes — 2.5mm, 3.2mm, 3.7mm, and 3.9mm — combining an orthodontic band pusher on one end with an adhesive remover blade on the other, eliminating the need to switch instruments during banding and debonding procedures. Certified to CE, ISO 13485, and FDA standards, this instrument is used by orthodontists and dental clinicians in orthodontic practices, dental hospitals, and specialist orthodontic departments.

Dual-End Design: Band Pusher and Adhesive Remover in a Single Instrument

The Band Pusher Clamp Adhesive Remover integrates two distinct orthodontic working ends into one instrument body. The band pusher end applies controlled apical pressure to seat orthodontic bands to the cervical margin during the banding phase of fixed treatment. The adhesive remover end provides a blade profile for removing residual bonding composite from enamel surfaces during the debonding phase. This dual-function configuration reduces the number of instruments required in both banding and debonding trays, improving chairside efficiency and reducing instrument turnaround requirements between procedures.

Four Size Variants to Match Archwire and Band Slot Dimensions

This instrument is available in four working end sizes — 2.5mm, 3.2mm, 3.7mm, and 3.9mm — allowing clinicians to select the configuration best matched to the bracket slot dimensions and band widths used across their clinical protocols. Selecting the correctly sized working end ensures adequate contact with the band edge or adhesive surface without inadvertently engaging adjacent soft tissue or enamel margins. The range of sizes supports use across different bracket systems and tooth sizes from incisors through to molars.

Medical-Grade Stainless Steel Construction for Repeated Clinical Use

Each instrument is manufactured from medical-grade stainless steel, providing corrosion resistance, dimensional stability, and surface hardness appropriate for repeated clinical use and sterilization cycles. The instrument is rust-free and maintains both working end geometries across extended use in high-turnover orthodontic clinical environments. Stainless steel construction ensures both the band pusher tip and adhesive remover blade retain their functional profiles without deformation under the mechanical forces involved in band seating and composite removal procedures.

Autoclave Sterilization Compatibility for Reusable Orthodontic Instruments

The Band Pusher Clamp Adhesive Remover is designated as a reusable instrument, fully compatible with standard autoclave and steam sterilization protocols used in licensed dental and orthodontic facilities. Each instrument withstands repeated thermal sterilization cycles without deformation of either working end or degradation of the handle surface. Facilities should follow their validated sterilization cycle parameters and reprocessing guidelines for Class I reusable dental instruments.

CE Mark, ISO 13485, and FDA Certification for Orthodontic Instrument Procurement

This instrument is classified as a Class I medical device manufactured under CE Mark, ISO 13485, and FDA compliant quality standards. ISO 13485 certification confirms Peak Surgicals operates a documented quality management system covering design control, material traceability, and production consistency for dental and orthodontic instruments. CE Mark confirms conformity with European medical device regulations, and FDA compliance supports procurement for US-based orthodontic practices, dental schools, and hospital orthodontic departments requiring verified regulatory documentation.